for additional information and latest specifications, see our website: www.triquint.com 2 revision c, december 14, 2005 CLY2 datasheet high-power packaged gaas fet description the CLY2 is a high-breakdown voltage gaas fet designed for pa driver applications in the 400 mhz to 3 ghz frequency range. it is ideal for portable pa applications in mobile phones and portable wlan transceivers due to its easy matching and excellent linearity. the CLY2 exhibits +23.5 dbm output power with +3v vds at 1.8 ghz with an associated gain of 14.5 db. power added efficiencies to 55% are achievable. features ? for frequencies up to 3 ghz ? wide operating voltage range: 2 to 6 v ? p out 23.5 dbm typical at v d =3v, f=1.8ghz ? high efficiency: better than 55 % ? nfmin 0.79 db typical at 900 mhz ? low cost a pplications ? power amplifiers for wlan transceivers ? driver amplifiers for wlan or mobile phone basestations ? low noise amplifier for basestations and antenna amplifiers package outline, mw6 6 5 4 3 2 1 pin configuration: 1 & 6: gate 2 & 5: source 3 & 4: drain
CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 3 revision c, december 14, 2005 maximum ratings parameter symbol values unit drain-source voltage v ds 9 v drain-gate voltage v dg 12 v gate-source voltage v gs -6 v drain current i d 600 ma channel temperature t ch 150 c storage temperature t stg -55...+150 c total power dissipation (t s < 50 c) 1) p tot 900 mw thermal resistance channel-soldering point 1) r thchs 110 k/w 1) t s : temperature at soldering point electrical characteristics (t a = 25c , unless otherwise specified) parameter symbol min typ max unit drain-source saturation current v ds = 3 v v gs = 0 v i dss 300 450 650 ma drain-source pinch-off current v ds = 3 v v gs = -3.8 v i d - 5 50 a gate pinch-off current v ds = 3 v v gs = -3.8 v i g - 5 20 a pinch-off voltage v ds = 3 v i d =50a v gs(p) -3.8 -2.8 -1.8 v small signal gain*) v ds = 5 v i d = 180 ma f = 1.8 ghz p in = -5 dbm g - 15.5 - db small signal gain*) v ds = 3 v i d = 180 ma f = 1.8 ghz p in = -5 dbm g - 14.5 - db output power v ds = 3 v i d = 180 ma f = 1.8 ghz p in = 10 dbm p o 22.5 23.5 - dbm
CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 4 revision c, december 14, 2005 electrical characteristics (cont) 1db-compression point v ds = 3 v i d = 180 ma f = 1.8 ghz p 1db - 23.5 - dbm 1db-compression point v ds = 5 v i d = 180 ma f = 1.8ghz p 1db - 27.0 - dbm power added efficiency v ds = 3 v i d = 180 ma f = 1.8 ghz p in = 10 dbm pae - 55 - % noise figure v ds = 3 v i d = 180 ma f = 1.8ghz nf 1.48 db *) matching conditions for maximum small signal gain (not identical with power matching conditions!) **) power matching conditions: f=1.8ghz: source match: ms : mag = 0.74, ang 132; load match: ml : ;mag 0.61, ang -153
CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 5 revision c, december 14, 2005 electrical characteristics (cont) output characteristics compression power vs. drain-source voltage f = 1.8ghz; ids = 0.5 idss p1db 0 5 10 15 20 25 30 35 40 [dbm] 0123456 [v] drain-source voltage d 0 10 20 30 40 50 60 70 80 [%] 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 01234567 drain-source voltage [v] draincurrent [a] vg=0 v vg=-0,5v vg=-1,0v vg=-1,5v vg=-2v vg=-2,5v ptot dc
CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 6 revision c, december 14, 2005 electrical characteristics (cont) typical common source s-parameters and noise data v ds = 3 v i d = 180 ma z o = 50 ? f f min opt r n r n ghz db mag ang ? ? 0.9 0.79 0.564 61 13.4 0.267 1.8 1.47 0.585 99 13.6 0.272 additional s-parameter and noise data available on data disc! freq. [ghz] |s11| CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 7 revision c, december 14, 2005 electrical characteristics (cont) total power dissipation p tot = f(t s ) 0 0.2 0.4 0.6 0.8 1.0 [w] 0 50 100 150 ts c o permissible pulse load p totmax /p totdc = f(t p )
CLY2 datasheet for additional information and latest specifications, see our website: www.triquint.com 8 revision c, december 14, 2005 package dimensions dim. min. nom. max. gradient remark a 1.1 a 1 0.1 a 2 1.0 b 0.3 b 1 0.6 c 0.08 0.15 d 2.8 3.0 e 1.2 1.4 |e| 0.95 |e 1 | 1.9 h e 2.6 l e 0.6 a max 10 1 q 2...30
CLY2 datasheet package marking package orientation on reel ordering information type marking pin configuration . 1 2 3 4 5 6 package 1) cly 2 cy2 g s d d s g mw 6 additional information this part is compliant with rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). the part is rated moisture sensitivity level 1 at 260c per jedec standard ipc/jedec j-std-020. esd: e lectro s tatic d ischarge sensitive device. observe handling precautions. for latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: (503) 615-9000 email: info_wireless@tqs.com fax: (503) 615-8902 for technical questions and additional information on specific applications: email: info_wireless@tqs.com the information provided herein is believed to be reliable; triquint assumes no liability for inaccuracies or omissions. triquint assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. prices and specifications are subject to change without notice. no patent rights or licenses to any of the circuits described herein are implied or granted to any third party. triquint does not authorize or warrant any triquint product for use in life-support devices and/or systems. copyright ? 2005 triquint semiconductor, inc. all rights reserved .
|
